Setting up Vlan in Juniper Switch (JunOS)

User documentation

  • Last Updated: 08/06/2021

Another popular brand of switches is Juniper. These switches offer the same functionality of Cisco ones just with different syntax.

Commands to create Vlan:

Edit vlan
Edit <vlan name>
Set vlan-id <#>

Commands to allow the vlan on a port:

Edit interfaces
Edit ge-0/0/<port #>
Edit unit 0
Edit family ethernet-switching
Edit vlan
Set member <vlan id or vlan name>

Note: to delete lines that aren’t working/have errors use the delete command followed by the exact line or section that you would like to delete (“delete” functions similar to the “no” command in Cisco)